Table of Contents
Advertisement
2007_Booklet.qxd
6/11/04
P O L A R I Z E D P L U G
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electrical shock, this plug will fit only one way into a polarized outlet. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
SAVE THESE INSTRUCTIONS
U S I N G Y O U R W A F F L E R
For best results, follow these simple instructions. When your waffler is heated for the first time, it
may emit slight smoke or odor. This is normal with many heating appliances. This does not
affect the safety of your appliance. However, it may affect the flavor of the first set of waffles
prepared in your waffler, and it is recommended that you discard these.
1.
Set the Waffle Browning Control to your desired setting. At first, try a setting between 3 & 4.
You may later adjust it lower or higher according to your preference. A lower setting
produces a lighter colored waffle, while waffles made at a higher setting are darker and
crisper. Different waffle batters will also cook up differently. Over time, you will find your
perfect setting for the batter you use.
2.
Close waffler and plug into 110/120 volt AC wall outlet. The red indicator light will go on,
indicating that the waffler has begun preheating. It will take approximately 5 to 8 minutes to
reach baking temperature. The red power light will remain on until you unplug your waffler.
3.
Before baking the first waffles of the day, use a pastry brush to lightly coat the top and bottom
waffle grids with vegetable oil. A light coating of non-stick cooking spray also works well.
4.
When the proper baking temperature is reached, the green light will go on and the
Waffle-Tone™ alert will sound. Once heated up, cycle times will be faster.
5.
Pour batter onto bottom grid of waffler. The green light will go off as the baking cycle begins.
6.
Close waffler and do not open for at least 1 1⁄2 minutes. Opening the lid too soon will cause
under-baked waffles to split, making them difficult to remove.
7.
When the green light goes on again and the Waffle-Tone alert sounds, your waffles should
be done according to the Waffle Browning Control setting that you've chosen. If you want
them darker, close the lid and continue baking until the desired color is achieved.
11:27 AM
Page 3
3
Hide quick links:
Advertisement
Table of Contents
