Subscribe to Our Youtube Channel
Related Manuals for anko Hollywood Mirror
Summary of Contents for anko Hollywood Mirror
- Page 1 Hollywood Mirror Small For Household Use Only Model No.: SM279A-SL Rev 2 *Brushes not included...
- Page 2 Page 2 of 12...
-
Page 3: Table Of Contents
Warnings .................. 4 Safety Directions ..............4 Components ................6 Assembly Method ..............7 Power Supply ................8 Using the Mirror Lights ............9 6.1 On / Off ..................9 6.2 Dimmer ..................9 6.3 Light Type ................10 User Maintenance ..............10 7.1 Cleaning the Mirror .............. -
Page 4: Warnings
Warnings Before using this appliance, read and follow all warnings and instructions in this manual, even if you are familiar with this product. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 5 Ensure the mirror is dry before adjusting the settings. Use only on dry, level, indoor surfaces. Use only as described in this manual. Always store your appliance indoors in a cool dry area. Ensure children and babies cannot play with plastic bags or any packaging materials.
-
Page 6: Components
Components Note: Brushes are not included Mirror Frame Base Stand Mirror Mirror Stand Neck. Tiltable Light Type Selector On / Off Switch & Brightness Adjustment Power Supply LED Lights Note: The specifications and/or components of this appliance are subject to change without prior notice Page 6 of 12... -
Page 7: Assembly Method
Assembly Method Please Note: a small amount of assembly is required. The base needs to be fitted to the mirror. To fit the base, place the base panel on a flat level surface. Position the neck of the mirror over the post protruding from the base and then lower onto the post as shown below. -
Page 8: Power Supply
Power Supply Important: Only use with Power Supply Model: WJA-Y 121201000W (Output: 12Vd.c. 1A) Unravel the power supply cable. Plug in the small plug on the end of the power supply cable into the power jack located in the back of the mirror. Plug the power supply into the power point and switch on. -
Page 9: Using The Mirror Lights
Using the Mirror Lights 6.1 On / Off With the power supply plugged into the power point and switched on, and the power supply cable plugged into the back of the mirror, press the On / Off Switch button on the mirror front. The lights will turn on at full brightness. -
Page 10: Light Type
6.3 Light Type There are three types of light you can choose from being Natural, Warm and Cool. With the lights switched on, press the Light Type Selector button on the front of the mirror. Each press will cycle the light type from Natural to Warm to Cool and back around to Natural etc. -
Page 11: Cleaning The Mirror
7.1 Cleaning the Mirror Do not clean the mirror or other parts with petrol, solvents or any other flammable liquid. Do not clean with scouring pads, rough cloths or the like as the surface will be damaged. Use only a very soft dry cloth to gently wipe the mirror and other parts. Do Not submerge the mirror or other parts in liquid. -
Page 12: Warranty Against Defect
Warranty Against Defect 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where...
Need help?
Do you have a question about the Hollywood Mirror and is the answer not in the manual?
Questions and answers