Seicane S127203 Upgrade Installation Replacement Instruction

For hyundai ix35, hyundai tucson

Seicane S127203 2009-2015 HYUNDAI ix35 aftermarket car stereo

upgrade installation replacement instruction

Seicane S127203 2009-2015 HYUNDAI ix35 car stereo after installation

Please note:

This unit can be suitable for the following cars which are also with the same installation steps

as follows.

2009-2015 HYUNDAI ix35

2009-2014 Hyundai TUCSON

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid

scratching it during its detachment and installation. Please keep handy any parts from the car

and make use of all the original screws from the car as much as possible. so each related part

of the unit can be fixed securely.

4. For your convenience, here's the recommended tools for removal and installation from

Seicane, please check for more details:

srd-400

www.seicane.com

http://www.seicane.com/car-dvd-dismantling-device-

Table of Contents

Do you have a question about the S127203 and is the answer not in the manual?

Page 1 Seicane S127203 2009-2015 HYUNDAI ix35 aftermarket car stereo upgrade installation replacement instruction Seicane S127203 2009-2015 HYUNDAI ix35 car stereo after installation Please note: This unit can be suitable for the following cars which are also with the same installation steps as follows.
Page 2 2009-2015 HYUNDAI ix35 car stereo installation guide 1. Remove the top of the original radio panel with a plastic knife. 2. Remove the screws. 3. Remove the panel under the original radio with a plastic knife.
Page 3 4. Pull the plug behind the panel. 5. Remove the screws under the original radio. 6. Take out the original radio out of the dashboard.
Page 4 10. Connect the Seicane car stereo to your original car radio 's plugs. 11. Put the new Seicane car stereo into the dash. 12. Turn on the new Seicane car stereo and check whether the radio is working properly. 13. Firm all screws and the panels into their original place.