Specifications; Safety Information - Grindmaster 250 Operator's Manual

Specifications
Model Description
(2) 5.5 lbs. hoppers. Single portion each side.
250
C-UL-US Certification
(2) 5.5 lbs. hoppers. Three portions each side.
250-3A
C-UL-US Certification
(2) 5+ lbs. removable hoppers. Dual portions each side.
250RH-2
C-UL-US Certification
(2) 5+ lbs. removable hoppers. Three portions each side.
250RH-3
C-UL-US Certification
250- (2) 5.5 lbs. (2.5 kg) hoppers. Single portion each side.
230V UL, NSF Certification
Model 250 and 250A

Safety Information

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
For your safety and the safety of others, read all warnings and the operator's manual before installing or using
the product.
DANGER: This term warns the user of imminent hazard that will result in serious injury or death.
WARNING: This term refers to a potential hazard or unsafe practice, which could result in serious injury or death.
CAUTION: This term refers to a potential hazard or unsafe practice, which could result in minor or moderate
injury.
NOTICE: This term refers to information that needs special attention or must be fully understood.
• Product must be attached to a three wire 120V 15 AMP receptacle (export units - 230V 16 AMP).
• Do not deform plug or cord.
• Follow national and local electrical codes.
• Do not use near combustibles.
• Use only on a circuit load that is properly protected and capable of the rated load.
• Always unplug unit from power supply before servicing or cleaning.
FAILURE TO COMPLY RISKS PERSONAL INJURY, SHOCK HAZARD, FIRE, OR DAMAGE TO EQUIPMENT.
2
Important Safety Information
WARNING
Grindmaster ®
Electrical
120V / 920 W / 8A / 1 Ph
120V / 920 W / 8A / 1 Ph
120V / 920 W / 8A / 1 Ph
120V / 920 W / 8A / 1 Ph
230V / 50/60 Hz / 4A
Model 250RH-2 and 250RH-3
250 Series Coffee Grinders