Advertisement
Quick Links
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Please note that the warning sticker is placed on the cribs to keep parents and
caregivers informed it is a requirement by law under CPSC And ASTM.
We do apologize for any inconvenience this may cause you.
ASSEMBLY INSTRUCTIONS
Comes with a mattress.
s
1
ITEM NO: 634
634
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DOM 634
Summary of Contents for DOM 634
- Page 1 Dream On Me Inc. ASSEMBLY INSTRUCTIONS 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 OFFICE: 732-752-7220 ITEM NO: 634 CUSTOMER SERVICE: 732-366-1788 Comes with a mattress. Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.
- Page 3 WARNING ! · FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. · READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK.
- Page 5 CONNECTION HARDWARE QUINCAILLERIE DE CONNEXION a. 3” Allen head Bolt 8 pcs c. 1” Allen head Bolt 4 pcs b. Barrel Nuts 16 pcs c. Vis à six pans 1” 4 pcs No drills necessary. Do not use power screwdriver Nut x d.
- Page 6 STEP 1 Attach the left side pannel (C) to the left front leg (F) and the left back leg (E) by using allen head bolts (a) & bolts (t) and barrel nuts (b) . Then attach the right side pannel (D) to the right front leg (H) and the right back leg(G) by using allen bolts(a) &...
- Page 7 STEP 3 Left support brackets Attach the (r) and Right support brackets (s) to the Wooden mattress base by using allen head bolts(c) and Nut(f) . Fixez les supports gauche (r) et droit (s) à la base du matelas en bois (J) à l’aide des vis à...
- Page 8 STEP 5 Attach the front rail (B) to the left front leg (F) and right front leg (H), By using allen head bolts (a), and barrel nuts(b). TIGHTEN ALL SCREWS. STEP 6 Put the mattress(K) into the bed.
- Page 9 CONVERT THE CRIB INTO DAY BED Remove the front rail(B). then locate the mattress base to the lowest position. Converting crib to a twin bed I (FRAME RAIL NOT INCLUDED TO CONVERT TO A TWIN BED I) 1.Remove the Wooden mattress base(J) and remove the right side pannel(I) and the left side pannel (H).
- Page 10 Converting crib to a twin bed II Conversion kit is sold separately You have the option to convert crib to a twin bed II. 1:Use the back rail as the headboard of twin bed II. 2:Connect the left foot platform and the right foot platform to the rail which are not included and sold separately.
- Page 11 LIMITED WARRANTY workmanship and agrees to remedy any such defect. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
Need help?
Do you have a question about the 634 and is the answer not in the manual?
Questions and answers