Advertisement
Quick Links
Advertisement
Related Manuals for AUTHOR Alarm IGLA Series
Summary of Contents for AUTHOR Alarm IGLA Series
- Page 1 QUICK START GUIDE...
- Page 2 Dear car owner! Please note that the AUTHOR Alarm’s anti-theft devices are intended only for installation in certified installation centers. AUTHOR Alarm’s anti-theft devices installed by other organizations or individuals is not subject to warranty and service! The developer and manufacturer are not responsible...
- Page 3 General information For complete operating manual visit our web-site http://author-alarm.com. IGLA is unique device to protect your car from theft. The device has an innovative mechanism of engine locking that uses standard wiring of the car so there is no additional wiring that can be easily found. The device cannot be found by any known means.
- Page 4 IGLA SYSTEM INSTALLATION Choose your installation center Please note that the AUTHOR Alarm’s anti-theft devices are intended only for installation in certified installation centers. AUTHOR Alarm’s anti-theft devices installed by other organizations or individuals is not subject to warranty and service!
- Page 5 IGLA SYSTEM CONTROL Functioning check After IGLA anti-theft system has been installed be sure to check with the installer: • Authorization with the PIN-code • Authorization with the key fob or with smartphone • Engine locking and unlocking • Service mode activation and deactivation •...
- Page 6 After you enter the correct PIN-code there will be 2 indication light signals inside the vehicle cabin and you can start driving. If the PIN-code is not correct, the second attempt to enter the PIN-code is available in 5 seconds after the failed attempt to log in or after turning off the ignition for 10 seconds and starting the ignition again (without starting the engine or pressing the brake pedal).
- Page 7 Engine unlocking After the engine was locked in order to unlock it you should switch off the ignition for 10 seconnds, then switch it on without starting the engine (without pressing the brake pedal), enter the PIN-code and start the engine. The engine will be unlocked. In case the current PIN-code is lost you can reset it using an individual emergency code, hidden under the protective layer of the plastic card from the set.*...
- Page 8 Key fobs and plastic cards Do not leave key fobs* in the installation center! If you do not plan to use key fobs for authorization, they should still be in a safe place so that car thieves could not use them. Check the presence of 2 key fobs * and 2 plastic cards (with the secret codes and brief instructions).
- Page 9 IGLA SYSTEM SETTING Change the PIN-code The PIN-code set in the service centre shall be changed when the car-owner get his/her car back from the service centre with the anti-theft system IGLA installed. Also it is recommended to change the PIN-code if you suspect someone has watched you entering the PIN- code.
- Page 10 The number of clicks shall be in the range from 3 to 20 clicks. The interval between clicks shall not be more than 2 seconds. There is no difference between long and short press of the button. Different combinations of buttons and their order can be used, e.g.
- Page 11 For authorization via smartphone download and install Author ID app via links bellow (or scan QR-code): https://itunes.apple.com/ru/app/author-id/id1144594689?mt=8 https://play.google.com/store/apps/details?id=com.dma.author. authorid Before the pairing your smartphone to the IGLA system make shure that it’s not connected with another car systems via Bluetooth (multimedia system, wireless headset, etc.) and there are no active key fobs near the system (remove all the batteries).
- Page 12 4. Authorize in the system via PIN-code. 5. Activate the PIN-code change mode (press the accelerator pedal as far as it can go (or other control element*), enter current PIN-code and release the accelerator pedal). The indication signal will start flashing once in 3 seconds.
- Page 13 In case of successful pairing there will be 2 light indication signals after switching off the ignition. Now your smartphone will be functioning as a key fob. The connection to the IGLA system is done via the encrypted channel. Smartphone functioning as a key fob only when Bluetooth is on.
- Page 14 Specifications Current consumption in a standby mode (the ignition is off) ............ 6-8 mА Operating voltage ............6-15 V Radio-channel frequency ........2,4 GHz Battery life time ............. 6 months Key fob battery type ..........CR2032 List of standard equipment Anti-theft system IGLA 1 pcs Quick start guide...
-
Page 15: Warranty Certificate
WARRANTY CERTIFICATE Warranty is 12 months from the date of the purchase. During this period technical support and maintenance are guaranteed for free. The warranty does not apply to the items with: • mechanical damage, burnt and char pieces, components, conductive tracks etc.;... - Page 16 Supported Cars List App.
Need help?
Do you have a question about the IGLA Series and is the answer not in the manual?
Questions and answers