Table of Contents
Advertisement
BlueBox RFID Devices
2.3
Adjusting the RF TX Power
Navigate to this configuration page. Change the value of "RF output power" to the desired test value. Larger numbers will
result in more RF TX Power.
Figure 2-3
Parameters RF Configuration
2.4
Test If RFID Tags Are Detected
Open the screen "Inventory". Now press [ Request ] on the bottom of the screen. In every operation mode the device will
scan for tags and show them.
Figure 2-4
Inventory Test Function
For continuous update of this list, you can checkmark "Infinite Request".
OEM RFID Modules
Operating BLUEBOX Show for Testing
Page 7 of 12
Advertisement
Table of Contents
