Initial Operation
1
Initial Operation
1.1
Connecting the Cables
Antenna Connection
USB Connection
The BlueBox will accept all
commands on all interfaces.
So you can perfom all tests
using the USB connection.
Figure 1.1
Connection Overview
1.2
USB Driver Installation
After Plug-In windows may request the USB driver. Please navigate the installation wizard to the file
\04_USB_Driver\BB2VCP.inf
Finally the device shall connect as VCom Port. The number may vary depending on previous VCP installations on the PC.
Page 4 of 12
Power Connection
BlueBox Quick Start Guide
OEM RFID Modules