Summary of Contents for Night & Day Furniture CONTINENTAL Tango
Page 1
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 Parts in this box. Hardware in this box. Clevis Pin x 2 Locking Pin x 2 Back Deck x 1 60mm Bolts x 12 Wooden Dowel x 20 Storage Rack x 1 40mm Bolts x 3 Barrel Nuts x 12 Seat Deck x 1 Allen Key x 1...
Page 2
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 30mm JCBs Assemble the Legs to Assemble the Seat Deck Slats the Seat Side Rails. to the Slat Supports. 16mm 30mm The Notch goes on top! 16mm JCBs Seat Side Rail 30mm JCBs M8 x 60mm Bolt...
Page 3
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 30mm JCBs Assemble the Back Deck 16mm 30mm Slats to the Slat Supports. 16mm JCBs 30mm JCBs Important Note: To make assembly easier, don't fully tighten the bolts until the complete deck is put together. Wood 60mm Dowels...
Page 4
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 Turn the Back Deck over, and assemble the Kicker Blocks to the Back Side Rails. Kicker Block Clevis Pin Locking Pin Clevis Kicker Block with round end down. Kicker Block 40mm JCB 60mm JCB &...
Page 5
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 Hook the Seat Deck onto the Snapper. Pull the Seat over the "Snap Point". Lift the Seat Deck in vertically, so the Pins meet with the Rubber Snapper. The head of With both Top Pins inside the notch on the Please Note: the Snapper should fit between both Pins.
Page 6
CONTINENTAL Tango Assembly Instructions ™ COLLECTION 0611 D I S A S S E M B L Y : H O W T O U N H O O K T H E S E A T From the Bed position, lift the Seat all the way. Push the Seat over the "Snap Point."...