Ram Mounts Roto-View Manual

Parts Index

* not to scale
A
x 1
H I
x 2 x 4
#8-32 #6-32
Use the screws that came with your RAM
1
front side of (A) RAM Roto-View
®
A
Place (H) nuts inside pockets of (B) tube adapter before attaching
3
to (G) tube.
G

Safety Precaution

Do not install this product near or over an airbag deployment area or in a location that obstructs the driver's vision or interferes with vehicle
operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
To see more mounting options, visit rammount.com
rammount.com
1.800.497.7479
support@rammount.com
C
B
x 1 x 1
K
J
x 4 x 2
#6 x 1/2" #8-32 x 5/8"
Cradle to attach to the
®
.
™
N
H
B
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
RAM Roto-View
®
D
x 1
L
M
x 2 x 4
#8-32 x 1 1/4" #6-32 x 1/2"
While pressing against back magnets of (C) RAM
2
red adhesive plate off and slide (D) ball base over magnets aligning the
holes with (C) RAM Power Plate
®
secure the ball base.
C
Hold (B) tube adapter against (G) tube and attach to (A) RAM
4
sub assembly with (J) screws without fully tightening.
Keyboard Adapter
™
F
G
x 1
N
x 1
x 1
Power Plate III, slide
® ™
III holes. Use (M) screws and (I) nuts to
™
I
D
M
Roto-View
®
J
Continue on back
™