Bogen VMIX Installation And Use Manual
Bogen communications installation and use manual power vector mixer vmix
Hide thumbs
Also See for VMIX:
- Specifications (8 pages) ,
- Specifications (2 pages) ,
- Information (13 pages)
Related Manuals for Bogen VMIX
Summary of Contents for Bogen VMIX
- Page 1 Power Vector Mixer Model VMIX Installation and Use Manual © 2005 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice. 54-2134-01C 1204...
- Page 2 Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, information is subject to change. Important Safety Information WARNING: To Reduce The Risk of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.
-
Page 3: Table Of Contents
Contents PANEL DESCRIPTIONS...2-3 VMIX Front Panel ...2 VMIX Rear Panel...3 INSTALLATION ...4 Package Contents ...4 Mounting ...4 Rack Mounting ...4 Shelf/Table Mounting ...4 Module Installation ...4 MODULES ...5 Output Modules ...5 Functionality ...5 Input Modules ...5 Functionality ...5 Priorities ...5 CONNECTIONS ...6-7... -
Page 4: Panel Descriptions
Panel Descriptions VMIX Front Panel 1. Input Volume Controls Each of the 8 inputs is controlled by an independent volume control. 2. Signal / Clip Indicators A single two-color LED located above each channel’s volume control indicates the audio activity of that channel’s input. -
Page 5: Panel Descriptions
An RCA connector that allows the bridging of Power Vector products together for system expansion. 4. Remote Volume Control Terminals Three terminals are provided for connection to a Bogen Model RVCP, Remote Volume Control Panel, to control the mixer’s motorized Master Volume Control. -
Page 6: Installation
Module Installation Eight module bays are available to accept Bogen’s new advanced input modules. Module bays 7 & 8 can also accommodate Bogen’s new advanced output modules, thereby allowing users to customize the mixer to suit the needs of the installation. -
Page 7: Modules
Priorities The Power Vector mixer allows inputs to be prioritized at four different levels. The Bogen input modules con- tain circuitry that can cause their outputs to be muted in response to higher priority control signals from other input modules. -
Page 8: Connections
Connections Unbalanced Output The VMIX includes an unbalanced output for connection to an auxiliary or high-impedance input using an RCA connector. Output level is 0 dBµ when meter reads “0”. Maximum output is +20 dBµ. Balanced Output Three terminals are provided for the transformer balanced output of the Power Vector mixer. -
Page 9: Connections
Connections Mute Control Each priority bus (High, Medium, and Low) can be externally activated. This allows priority buses of two or more Power Vector products to be linked together for system expansion purposes. A particular mute priority can be externally forced by shorting that priority's bus terminal to the C terminal of the Mute Control (the C terminal is the system ground). -
Page 10: Operation
Operation Front Panel Controls & Indicators Input Volume Controls and Signal / Clip Indicator Each input module may be individually controlled by its corresponding volume control knob. A single LED located above each channel’s volume control indicates the audio activity of that channel’s input. Green indi- cates signal present at the input. -
Page 11: Operation
Operation Rear Panel Controls Balanced Out Switch A three-position slide switch selects the signal level of the balanced out- put. Output levels of +4 dBµ, -10 dBµ, and -50 dBµ are available. The indi- cated output level corresponds to “0” on the level meter. Other Controls (Located In Module Bay 6) Tone Control Bypass Switch... -
Page 12: Block Diagram
Block Diagram... -
Page 13: Specifications
Specifications Output Level Balanced: Unbalanced: Max. Output Level Balanced: Unbalanced: Frequency Response: Distortion: Signal-to-Noise Fundamental: w/ AUX MAX1R Module: w/ MIC2X Module: w/ TEL1S Module: Tone Controls Bass Frequency: Treble Frequency: Low Cut Frequency: Signal / Clip Indicator Signal Detect Threshold: Signal Indicator Hold Time: Clip Detect Threshold: Clip Detect Hold Time:... -
Page 14: Accessories
Accessories A variety of accessories are available. RPK87 - Rack Mounting Kit Adapts Power Vector Mixer for 19" rack mounting • • Heavy gauge steel construction • Fits Power Vector Mixer into 2 rack spaces (3 RVCP - Remote Volume Control Panel •... -
Page 15: Limited Warranty; Exclusion Of Certain Damages
Limited Warranty; Exclusion of Certain Damages The Bogen VMIX is warranted to be free from defects in material and workmanship for three (3) years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective (as confirmed by Bogen upon inspection) during the applicable warranty period, will be repaired or replaced by Bogen, at Bogen’s option,... - Page 16 50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel. 201-934-8500 • Fax: 201-934-9832 www.bogen.com...
Need help?
Do you have a question about the VMIX and is the answer not in the manual?
Questions and answers