Download Print this page

Installation - Honeywell HCC-960 Series Operation Manual

Wdr/dnr high resolution
Hide thumbs

Advertisement

3. Installation

3.1 Check all accessories in the enclosed package .
-. HCC-960/965 SET
-. 4-pin connection cable
-. OPERATION MANUAL
-. Auto Iris Lens Plug
3.2 Mounting a Lens
3.2.1 C/CS Mount Lens
① Remove the protective cap in front of the camera.
② Adjust the mount ring whether it is for C or CS.
③ Loosen Set Screw with a Phillips screwdriver.
④ Turn the mount ring counterclockwise in case of C-Mount Lens.
Turn the mount ring clockwise in case of CS-Mount Lens
3.2.2 Auto Iris Lens
① Remove the cover of the iris lens plug and connect with Lens cable.
VSD LENS PIN CONFIGURATION
3
4
1
2
1. POWER(12V)
3. VIDEO SIGNAL
Set the select switch to VSD
* For the best condition, read lens manual carefully.
DC IRIS LENS PIN CONFIGURATION
①③
2. NO CONNECTION
4. GND
4
3
① ③
1
2
1. CONTROL-
2. CONTROL+
3. DRIVE+
4. DRIVE-
Set the select switch to DC
9

Advertisement

loading

This manual is also suitable for:

Hcc-965 seriesHcc-960n-vrHcc-960p-vrHcc-965p-vr