Honeywell HCC-960 Series Operation Manual page 16

5.5 AGC setting
Adjust maximum value of AGC gain
-6dB  0dB  ...  30dB  34dB
AGC CONT.
5.6 Sens up setting
Compensate low illumination condition.
Adjust the maximum integration fields to get a brighter
dynamic image. The scene will be slower than when
set to OFF. The larger this field, the greater the noise
of the image. For more dynamic range,
adjust the SENS UP and increase AGC.
OFF  2FLD  4FLD  ...  128FLD
SENS UP
 256FLD  512FLD
5.7 Digital Noise Reduction setting
The background noise in the low light level increases
automatically as the level of gain changes.
16
2D-NR or 3D-NR can decrease digital noise.
OFF  2D-NR>  3D-NR>
DNR
2D-NR and 3D-NR have a submenu, you can set the
DNR level.
In case of 2D-NR, LEVEL
In case of 3D-NR, LEVEL
☞ The higher the level in 3D-NR,
the greater the level of noise is reduced,
however there will be an increase in the ghost image.
5.8 Special Setup
GENERAL SETUP
PZM SETUP
MD SETUP
COMM. SETUP
IMAGE SETUP
NIGHTSHOT
FACTORY
SAVE & EXIT
RETURN
5.8.1 General Setup
SYNC.
BURST
SHARPNESS
GAMMA
SAVE & EXIT
RETURN
1 ~ 6
1 ~ 31
① Sync. signal level setting
② Burst signal level setting
③ Sharpness level setting
④ Gamma setting
<< SPECIAL SETUP >>
OFF
OFF
<Fig.5-8 Special Setup>
<< GENERAL SETUP >>
20
100
8
4
<Fig.5-9 General Setup>
SYNC. 0 ~ 50
BURST 0 ~ 255
SHARPNESS 0 ~ 15
GAMMA 0 ~ 8