Usals Setup; Factory Default - Revolution Galaxy 70/70 User Manual

change the TP, then press CH+/CH- button to Add/Delete/Edit TP.
3. Motor Mode: Press the VOL+/VOL- button to select motor mode(DiSEqC
1.2 or USALS) input.
4. LNB Freq: Press the VOL+/- button to change the LNB frequency.
5. DiSEqC Type: It used to set DiSEqC1.0 port ,press the VOL+/VOL- button
to select the required .
6. DiSEqC 1.1: Press the VOL+/VOL- button to select the required
DiSEqC1.1 input.
7. Network search:Press VOL+/VOL- button to select the Network search
Yes/No.
8. 22KHz: It used to control the 22 KHz switch
9. LNB Power: Select the required LNB power.

4.2 USALS Setup

If you set the Motor Mode to USALS, you need set the longitude and the
latitude in USALS Setup.
Setup by Country: Press the RED button, you can choose the country, press
OK button to select.

4.3 Factory Default

You can restore the product to the factory default and you can also setup it
according to the wizard.
Note: Please note that once you perform All, all data and settings will be
8