Wall Mounting - Hitachi AXS100E Instruction Manual

Wall Mounting

Assembly is required. Installation must be carried out by qualified personnel only. Incorrect assembly can
result in severe personal injury and property damage (if you intend to install this product yourself, you
must check for installations such as electrical wiring and plumbing that may be buried inside the wall). The
supplied wall brackets are only for use on vertical walls constructed from solid brick, solid concrete, solid
wood, and solid wooden battens. It is the installer's responsibility to verify that the wall will safely support
the total load of the Soundbar and wall brackets. Additional tools (not included) are required for the
installation. Do not overtighten screws. Keep this instruction manual for future reference.
1. Attach the wall brackets to the main unit with 4 screws A following the diagram below.
Left wall
bracket
Right wall
bracket
Screw A
Screw A
GB
13