Chapter 2 Initial Installation; Requirements; Procedure - ADT BLUE Camera Hub User Manual

Chapter 2
Initial Installation
This Chapter covers the device installation of the WiFi extender.

Requirements

•
None of cables required for the installation.

Procedure

1. Choose an Installation Site
Select a suitable place to install the Camera Hub.
2. Power Up
Place the extender near the existing router. Provide the power to the extender so plug it in-
to a wall socket or a power strip. The LEDs light will be ON and make a welcome sound to
notice the extender is boot up successfully.
3. Check the LEDs
•
All 4 LEDs shall be ON when the power is supplied to the extender.
•
The Power LED should be ON
•
The LAN LED should be ON
•
The WAN LED should be ON
•
The Device LED should be ON
FCC ID: P27SCB1R0
2
6