ADT BLUE Camera Hub User Manual page 5

Appendix B - About Wireless LANs
Rear/Side Panel
Power Plug
Reset
WPS Button
Connect the power plug to a wall socket.
This button has two (2) functions:
•
Reboot. When pressed and released, the Camera Hub will reboot
(restart).
•
Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Date and restore the factory default values:
1. Power On.
2. Keep holding the Reset Button down for 3 seconds.
Release the Reset Button. The Camera Hub is now using the factory

default values.
Push the WPS button more than 3 seconds to trigger WPS pairing
process with voice (PBC mode).
During the pairing process, the LAN LED will fast blink until WiFi is

successfully connected.
5