Subscribe to Our Youtube Channel
Related Manuals for Meaco MeacoClean CA-HEPA 76x5 Wifi
Summary of Contents for Meaco MeacoClean CA-HEPA 76x5 Wifi
- Page 1 MeacoClean CA-HEPA 76x5 Wifi Instruction Manual MeacoClean CA-HEPA 76x5 Wifi Please read this instruction manual before using the air purifier and keep safe for future reference. Thank you for choosing Meaco, we really appreciate it.
-
Page 2: Saftey Information
Do not store or operate outdoors. If electrical wiring or components become wet, thoroughly dry them before using the unit. If in doubt do not use the air purifier and consult a qualified electrician or a Meaco approved engineer. -
Page 3: Wiring Instructions
GREEN/YELLOW. Always ensure that the cord grip is positioned and fastened correctly. Only ever use the same fuse as fitted in the original product, if in doubt please contact Meaco first, or a qualified electrician. Example wiring for a Standard British Plug:... -
Page 4: General Advice
GENERAL ADVICE ----------------------------------------------------------------------------------------------------------------------------- ---------- • Before putting your air purifier into operation for the first time, the instruction manual should be studied carefully. • After receiving the air purifier, you should check the unit for any transport damage. In case of damage, you should inform the sender immediately. -
Page 5: Product Identification
PRODUCT IDENTIFICATION ----------------------------------------------------------------------------------------------------------------------------- ---------- Control panel Light ring Air outlet Lasor sensor Body Air inlet Filter door Filter... -
Page 6: Installation
INSTALLATION ----------------------------------------------------------------------------------------------------------------------------- ---------- • Position the air purifier on a firm, flat, horizontal surface. • Leave at least 30cm of space around the air purifier and 50cm of space above the air purifier when in use. • Do not allow any objects or water to drop into or be inserted into the air purifier. •... -
Page 7: Control Panel
CONTROL PANEL ----------------------------------------------------------------------------------------------------------------------------- ---------- When plugged in all LED indicators will display for one second and then turn off – the air purifier is in standby mode. The display is touch screen, press the buttons quickly and firmly unless instructed otherwise. - Page 8 Mode button Press the mode button to move through the four modes: Auto, High, Medium and Sleep. The corresponding symbol will light up on the display. 1. Auto Mode: The fan speed will automatically adjust according to the air quality. 2.
- Page 9 WI-FI CONNECTION VIA THE ‘SMART LIFE’ APP ----------------------------------------------------------------------------------------------------------------------------- ---------- The air purifier can be controlled via a smart device using the third-party Smart Life app. Only one mobile device can be paired at a time. If you want to change the mobile device the air purifier is connected with, make sure you remove the connection from the previously connected smart device.
- Page 10 6. Click ‘Confirm indicator rapidly blink’. 7. Enter your Wi-Fi password and click ‘Confirm’. 8. Wait for the app to connect to the air purifier. This may take a few minutes. Place your smart device as close to the air purifier as possible. 9.
- Page 11 13. Click ‘Go to connect’. The app will take you to the Wi-Fi page on your mobile device. 14. Choose the Wi-Fi connection called ‘Smart Life’ (or something similar, the name will differ depending on the type of mobile device used). 15.
-
Page 12: Cleaning And Storage
CLEANING AND STORAGE ----------------------------------------------------------------------------------------------------------------------------- ---------- • Before cleaning the air purifier make sure the power has been turned off and the air purifier is unplugged from the mains. • The air purifier has one filter which is a combination of the following: the pre-filter, the HEPA filter and the carbon filter. -
Page 13: Specifications
4. Insert the new filter. 5. Put the filter door 6. Tap and hold back in place – squeeze the filter button the button on the door on the display for 7 seconds to to reinsert. reset the air purifier. •... -
Page 14: Troubleshooting
TROUBLE SHOOTING ----------------------------------------------------------------------------------------------------------------------------- ---------- TROUBLE CAUSE SOLUTION The filter is dirty and needs Replace the filter and then hold The ioniser/filter button is replacing the ioniser/filter button for 7 flashing red seconds to reset the air purifier The ioniser/filter button is still Hold the ioniser/filter button for The air purifier needs to be flashing red after the filter has... -
Page 15: Warranty And Customer Service
For the full list of the warranty terms and conditions please visit: www.meaco.com/warranty-terms. To prevent unnecessary expenses, we recommend that you always carefully read the user’s manual first. If this does not provide a solution, please call Meaco and we will be happy to help. This humidifier has been imported into... - Page 16 This marking indicates that this product should not be disposed with other household wastes throughout the UK and EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Need help?
Do you have a question about the MeacoClean CA-HEPA 76x5 Wifi and is the answer not in the manual?
Questions and answers