Battery Pack Chargers; Available Chargers - FES GEN2 14S Manual

FES BATTERY PACK GEN2 14S, Version 1.23

3. Battery pack chargers

For charging of FES battery packs, only special FES chargers as described below are
approved. If your country is using 110V~ grid, then you should use suitable voltage step up
transformer for chargers which required input voltage 230V~ 50/60 Hz.
Note: Each charger is preset with suitable settings for FES GEN2 14S and
works only if it communicates with BMS circuit board inside of the battery
pack.

3.1 Available chargers

1. FES KOP602 - standard equipment
- FES system comes with two chargers FES KOP602
- maximum charging current 9A
- required input voltage is 230V~ 50/60 Hz
2. FES KOP1001 - optional charger
- maximum charging current 18A.
- required input voltage is 230V~ 50/60 Hz
KOP 602 BMS Charger
KOP1001 BMS Charger
Page 8 of 26
September 2019