7
Bluetooth Receiver Mode
In Bluetooth Receiver mode HearLink PLUS transfers the audio from the
Bluetooth device to the speaker or stereo headphone connected to RX output.
Setting Up HearLink PLUS in Receiver Mode
Set Mode switch to RX position.
1
2
Connect HearLink PLUS RX port to non-Bluetooth speaker, stereo
system, wired-headphone, etc., via optical or 3.5mm audio cable. The
lit
or
OPT
AUX
3
Enable Bluetooth on the target device (e.g., smartphone). Search for
"Hearlink PLUS" and tap to connect. If a password is required, enter
0000.
When pairing is complete the
The lit
SBC
,
CODEC is being used.
The lit
and
A
first and second, respectively.
Short press to place HearLink PLUS into pairing mode.
Press and hold for 3 sec to disconnect from a connected device
and enter pairing mode.
When in pairing mode, the
When powered on HearLink PLUS connects automatically to
the last connected device.
Product Name: HearLink PLUS
indicator shows the connection type.
APTX
or
LL
text indicates which type of Bluetooth
texts indicate which devices have been connected
B
Product No.: BT5805A
OPT
AUX
indicator will shine steadily.
RX
indicator light will flash quickly.
RX
Doc.: HPUM_EN_Ver.01
HearLink PLUS User Manual
Wired Speaker
8