Bypass Mode - Wear & Hear HearLink Plus BT5805A User Manual

9

Bypass Mode

In Bypass mode HearLink PLUS transfers the audio from the TX input to the
speaker or stereo headphone connected to RX output.
Setting Up HearLink PLUS in Bypass Mode
Set Mode switch to Bypass position.
1
The indicator will shine steadily in Bypass mode.
Connect Hearlink PLUS TX port to TV or other multimedia device via
2
optical or 3.5mm audio cable. The lit
connection type.
3 Connect Hearlink PLUS RX port to a speaker via the same type of cable
as the TX port connection.
AUX-to-AUX or optical-to-optical configurations are supported
in Bypass mode.
Audio Playback in Bypass Mode
Short press to toggle audio Play/Pause.
Increase the volume. A tone is played when
maximum volume is reached.
Decrease the volume. A tone is played when
minimum volume is reached.
Product Name: HearLink PLUS
AUX OPT
Product No.: BT5805A
HearLink PLUS User Manual
OPT AUX
or indicator shows
OPT AUX
Doc.: HPUM_EN_Ver.01
Wired Speaker
12