Aeta Audio Systems Scoopy+ Getting Started

Don't be fooled by its look similar to the former Scoopy!
There's a great deal more to it than meets the eyes.
Getting Started
1- Turn SCOOPY + on by holding
for > 2 seconds to turn it off!)
2- To set up SCOOPY+, press
ools, then press
T
T ools
navigate up, down and across lists using the joystick. In the case, for the lan-
guage, use the right button. Press
3- To select the network: enter the menu by pressing
/ . Inside the visible menu, select
the joystick till you find the suitable network. Then press
4- To select the coding algorithm: Enter the menu by pressing
/
Algorithm Other
Algorithm Other
algorithms, as well as the menu node (
of coding algorithm. If you want to select a previously used coding algorithm,
use the joystick to scroll down till you get the offered algorithm and press
If you want to configure any other coding algorithm, choose
joystick to scroll down till you get the offered coding algorithms. Press
5- To select the audio parameters: Enter the menu by pressing
Scroll down the list till you have
list with all parameters. To set up the
se consult your complete and detailed user manual
6- Establish a link
Info : you can return to previous step at any time by pressing
Usefull phone numbers and adresses :
A- HOT LINES FOR CODEC TESTS
ISDN: +33 1 41 36 12 68
POTS: +33 1 41 36 12 75
IP: 200@86.64.17.66
Wireless voice: +33 1 41 36 12 68
Wireless IP: 200@86.64.17.66
To get other examples, please consult our web site at: www.aeta-audio.com
for >2 seconds. (Hold down
to enter the menu. Use the joystick to select
, select to access to the language option. You can
Misc
Misc
to validate
Change
Change Network
/ . Here you can see a list of previously selected coding
"Other")
"Other")
Audio, then press
Audio
Inputs
Inputs
B- APN Codes (mandatory for wireless communications)
Some codes for French operators
ORANGE: internet-entreprise or orange-mib
BOUYGUES: b2bouygtel.com
SFR: websfr
Read on...
, then /
Setup
Setup
Network, then scroll down using
, then
Setup
to choose a new configuration
and use the
Other
Other
, then
. You will have another
and configuration, plea-
Outputs
Outputs
Network
Network
/
Setup
.
Setup.
Setup