OK-I SHT-7540DN Operational Manual

Operational Manual
Digital Day & Night Box Color Camera
Please read the Operational Manual
before attempting to use this product.
FEATURES
1/3" Sony Super HAD CCD
540 TV Lines, HQ-1 DSP
0.15 Lux @ F1.0
Color mode automatically switches to B/W mode
under 2.0 Lux
Lead (Pb) Free RoHS Compliance
Day & Night Feature
12V DC / 24V AC
DIMENSIONS (Unit: mm)
NOMENCLATURE AND FUNCTION
SHT-7540DN
SHT-7540DNP
1. Lens mount
This mount is used to install a CS-mount lens.
CS-adaptor ring is required if use a C mount lens.
2. Camera mounting screw holes
Screw hole for fixing camera.
Mount Adaptor
3.
This adaptor can be attached to either the top or bottom of the unit.
Auto Iris Lens Connector (4-pin type)
4.
The lens connector supplies the auto iris lens (not supplied) with DC
power and a video signal or DC control signal.
PIN NO. VIDEO
1 DC + 12V
2
3 VIDEO SIGNAL
4
5. Control Switch
SW1. SYNC MODE: SYNC Mode Selection INT/L.L. switch.
SW2. AES: Automatic Electronic Shutter OFF/AES switch.
SW3. BLC: Back Light Compensation OFF/BLC switch.
SW4. F.L: Flickerless NOM/F.L switch.
SW5. AGC: Automatic Gain Control OFF/AGC switch.
VIDEO connector
6.
This is an output for connection to a video monitor, etc (75Ω).
Iris mode selection switch
7.
according to the type of your lens.
DC Level adjustment V.R.
8.
driven auto iris lens.
9. Power input terminal
Connect the power supply of 12V DC / 24V AC.
CONTROL SWITCH OPERATION
SW1. SYNC MODE: INT MODE: The camera may be operated
independently with its internal crystal control. L.L. MODE: This version
w/o L.L. function.
SW2. AES: AES: The automatic electronic shutter control 1/60(1/50) ~
1/100.000 sec. is employed for using a manual Iris Lens.
SW3. Example of Back Light Compensation: When the object is
dark by strong light (sun illumination etc) as (Fig 3-1). Please turn on
BLC switch. The object becomes as (Fig 3-2).
DC
CONTROL -
NC CONTROL +
DRIVE +
GND DRIVE -
Used to choose DC or VIDEO mode
Used to adjust video output level of DC
SHT-7540DN_rev09032008