Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tiger TI-01SS
Summary of Contents for Tiger TI-01SS
- Page 2 THANKS FOR USING OUR EQUIPMENT,PLEASE READ THIS MANUAL CAREFULLY BEFORE PREFACE USAGE. THE PRODUCTS ARE SERIES TOP GRADE FULL STAINLESS STEEL ELECTRONIC WEIGHING INDICATOR AND STAINLESS STEEL WATERPROOF PLATFORM SCALE, WE USED THE LATEST HIGH-TECH, IT HAS THE CHARACTERISTIC OF HIGH PRECISION, DISPLAY CELERITY, DURABLE, BEST AFTER SALE SERVICES, GOOD CORROSION-PROOF.
- Page 3 2 KEYBOARD AND CHARACTER PROMPT 2.1 KEYBOARD SET/FIG,SET/PARA, TURN ON/ TURN OFF KEY TARE KEY ZERO KEY INPUT FIG KEY 2.2 CHARACTER PROMPT INDICATION MEANING 3101.x SOFTWARE VERSION NUMBER dc x.xx AFTER POWER ON, IT SHOW THIS PROMPT, Mean the voltage of battery is x.xxV Err-00 AFTER POWER ON, LOAD CELL WIRING ERROR OR AD ERROR Err-01...
- Page 4 ② TURN OFF： PRESS <OFF> KEY. ③ AUTO TURN OFF： WHEN SCALE IS IN AUTO OFF STATE. IT WILL BE AUTO OFF AFTER 10 MINUTES WHEN SCALE IS AT ZERO AND NO OPERATION.（ SEE 3.9.3 ） ④ LOW VOLTAGE OFF: WHEN THE VOLTAGE IS TOO LOW, IT WILL AUTO TURN OFF.
- Page 5 3.9 SET AND USE PARAMETER PRESS <SET/0~9>3 SECONDS，ENTER SET AND SHOW MAIN MENU，PRESS <SET/0~9> CONTINUOUS， IT DISPLAYS： rAngE(SET LIMIT) UnItS(CHOOSE UNIT) A- OFF（CHOOSE AUTO POWER OFF） FILt(SET DISPLAY MODE) ZEro(SET AUTO ZERO) bUZZE(SET BUZZLE) d(CHOOSE DIVISION) LU-( BRIGHTNESS ADJUSTING) 3.9.1 rAngE(SET UPPER AND LOW LIMIT) 3.9.1.1 WHEN IT SHOWS rAngE，...
- Page 6 AND PRESS<TARE>TO CHOOSE. AFTER FINISHING IT DISPLAY PCS AND PCS LAMP LIGHTING. EXIT COUNTING: CHOOSE A UNIT. CAUTION: PICK QUANTITIES OF MAX LESS 30000 3.9.3 A-oFF（CHOOSE AUTO POWER OFF） WHEN IT DISPLAYS A-oFF，PRESS <TARE> TO ENTER，PRESS <SET/0~9> TO CHOOSE n OR y, n IS NOT IN AUTO POWER OFF SITUATION，y IS AFTER 10 MINUTES IN ZEROING, AUTO-OFF.
- Page 7 THE SPEED OF DISPLAY WILL BE SLOWER. 3.9.8 LU-（BRIGHTNESS ADJUSTING） WHEN IT DISPLAYS LU-, PRESS <TARE> TO ENTER， PRESS <SET/0~9> TO CHOOSE， LU-1 IS LOWER BRIGHTNESS，LU-2 IS HIGHER BRIGHTNESS，PRESS <TARE> TO CONFIRM. 4 NOTES 4.1 NORMAL NOTE 4.1.1 PLEASE READ THE INSTRUCTION MANUAL BEFORE USAGE. 4.1.2 PLEASE CALIBRATE SCALE REGULARLY.
- Page 8 5.3 PRESS <TARE> TO CONFIRM； 5.4 NOW DISPLAY INTERNAL NUMBER 0，IF IT IS NOT 0, PRESS <ON/ZERO> TO ZERO； 5.5 PLACE MORE THAN 10% MAX.CAPACITY STANDARD WEIGHTS ON PLATE, AFTER INTERNAL NUMBER IS STABLE, PRESS <TARE> TO INPUT THE VALUE OF WEIGHTS，PRESS <SET/0~9> TO ADD 1，PRESS <TARE> TO INPUT NEXT VALUE, TILL TO FINISH, IT SHOWS CAEnd ONE SECOND, RETURN TO WEIGHING.
Need help?
Do you have a question about the TI-01SS and is the answer not in the manual?
Questions and answers