Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vega Absolute SMART-MC0101
Summary of Contents for Vega Absolute SMART-MC0101
- Page 1 DOOR AND WINDOW SENSOR SMART-MC0101 User Manual www.vega-absolute.ru...
- Page 2 Smart-MC0101 / User Manual Document Information Title Door and window sensor Smart-MC0101 Document type Manual – Translation from Russian Document number V05-MC0101-01 Revision and date 04 – 06 July 2020 This document applies to the following products: Product line Product name...
-
Page 3: Table Of Contents
“LoRaWAN settings” tab ................................. 18 “Smart-MC0101” tab ................................22 5 COMMUNICATION PROTOCOL ............................23 SMART-MC0101 transmits the following types of packets ..................... 23 SMART-MC0101 receives the following types of packets ....................25 6 STORAGE AND TRANSPORTATION REQUIREMENTS ...................... 27 7 CONTENT OF THE PACKAGE ..............................28 8 WARRANTY .................................... -
Page 4: Introduction
Smart-MC0101 / User Manual INTRODUCTION This manual is designated for Vega Smart-MC0101 door and window sensor (hereinafter – device, sensor) manufactured by Vega-Absolute OOO and provides information on powering and activation procedure, control commands and functions of the device. This manual is targeted at specialists familiar with installation work fundamentals for electronic and electrical equipment. -
Page 5: Description And Operation
The internal clock is set automatically when device connected to the "Vega LoRaWAN Configurator" via USB, also adjustable via LoRaWAN. FUNCTIONAL Vega Smart-MC0101 sensor is class A device (LoRaWAN classification) and has the following features: Revision № 04 06 July 2020... -
Page 6: Marking
Smart-MC0101 / User Manual o Frequency plans RU868, EU868, IN865, AS923, AU915, KR920, US915, KZ865 supported o ADR support (Adaptive Data Rate) o Sending of confirmed packets (configurable) o OTAA or ABP activation (configurable) o Communication period - every 5, 15, 30 minutes, 1, 6, 12, 24 hours... -
Page 7: Specification
Smart-MC0101 / User Manual 2 SPECIFICATION Main USB-port micro-USB, type B Operating temperatures -40…+85 °С Built-in temperature sensor LoRaWAN AppEui by default 76616D6330313031 LoRaWAN class Quantity of LoRa channels Frequency plan RU868, EU868, IN865, AS923, AU915, KR920, US915, KZ865, custom (EU868... -
Page 8: Operation
Smart-MC0101 / User Manual 3 OPERATION INDICATION A double color indicator is located on the front of the sensor case and it informs a user about the device state. Indicator on the front of the device case Indicator signal Meaning... -
Page 9: Mounting Options
Smart-MC0101 / User Manual MOUNTING OPTIONS Door and window sensor considers interdependent placement of two components: - main part including all of electronics, - magnet. Device contain two Hall sensors located in two different places on a board. That allows mounting device in two ways. -
Page 10: Initial Startup
Smart-MC0101 / User Manual 2. The magnet is located to the left of the main part. With this placement, the Hall sensor 2 responds to the movement of the magnet. Magnet to the left, Hall sensor 2 works INITIAL STARTUP Door and window sensor is powered by the CR123A 3V 1400 mAh replaceable battery. - Page 11 Smart-MC0101 / User Manual Press the start button located on the board 2. OTAA. After pressing the start button, the device makes three attempts to connect to the network within the set frequency plan. After the activation request is confirmed by LoRaWAN network, the device sends a signal and switches to the "Active"...
-
Page 12: Connecting Via Usb
Smart-MC0101 / User Manual CONNECTING VIA USB The device Smart-MC0101 can be configured with the "Vega LoRaWAN Configurator" application (See part 4). micro-USB Before connecting the device to the computer for the first time, you must install the driver for the COM port stsw-stm32102, which can be downloaded from iotvega.com. After running the executable file VCP_V1.4.0_Setup.exe, the installer window will appear:... - Page 13 Smart-MC0101 / User Manual After pressing Finish the driver is ready for operation, - it is possible to connect the device via USB. Revision № 04 06 July 2020...
-
Page 14: Vega Lorawan Configurator
Smart-MC0101 / User Manual 4 VEGA LORAWAN CONFIGURATOR The "Vega LoRaWAN Configurator" application (hereinafter referred to as the configurator) is intended for setting up the device via USB. The configurator has two modes of operation - "Simple" and "Expert". In the "Simple"... -
Page 15: Connection To The Device
Smart-MC0101 / User Manual The application window contains three tabs – Device info, LoRaWAN settings and device settings. The language selection menu is in the upper right corner. CONNECTION TO THE DEVICE For the connection to the device, perform the following steps: 1. -
Page 16: Device Info" Tab
Smart-MC0101 / User Manual After making the necessary changes to the settings, you should click the "Apply settings" button and only then disconnect from the device with the "Disconnect" button. “DEVICE INFO” TAB The "Device info" tab displays information about the device, its status, and the data needed to register the device in the LoRaWAN network. - Page 17 Smart-MC0101 / User Manual Join network button - launch the LoRaWAN network connection procedure with the previously selected ABP or OTAA method. If the device is already connected to the network, reconnection procedure will occur. Link check (not displayed in the "Simple" mode) - when pressed, the device sends a special signal to the LoRaWAN network, in response to which the network informs it of the number of gateways that received this signal and the signal quality.
-
Page 18: Lorawan Settings" Tab
Smart-MC0101 / User Manual “LORAWAN SETTINGS” TAB The "LoRaWAN Settings" tab allows you to configure various parameters of the LoRa network. Region - allows you to select one of installed frequency plans or specify a custom frequency plan. Custom frequency plan is EU-868 based. - Page 19 Smart-MC0101 / User Manual This frequency plan allows you to set up to 16 channels, as well as the frequency and speed of the second receiving window. The first three channels and the second receiving window parameters are mandatory. Without these parameters the custom frequency plan will be considered empty.
- Page 20 Smart-MC0101 / User Manual Join accept delay 1 (not displayed in the "Simple" mode) – sets the time that the device will open the first receiving window to receive confirmation for the join request from the LoRaWAN network while OTAA mode active. The second window always opens after 1 second after the first.
- Page 21 Smart-MC0101 / User Manual TX power (not displayed in the "Simple" mode) – the device RF transmitter power is adjusted to this value when sending packets to the LoRaWAN network. This option can be change by the network server. TX datarate (not displayed in the "Simple" mode) – the device transmission datarate at which it will transfer packets to the LoRaWAN network.
-
Page 22: Smart-Mc0101" Tab
Smart-MC0101 / User Manual “SMART-MC0101” TAB The “Smart-MC0101” tab contains the settings of the connected device. Current state – displays the current parameters of the device - the internal temperature of the device, the battery level and two Hall sensors state. -
Page 23: Communication Protocol
Smart-MC0101 / User Manual 5 COMMUNICATION PROTOCOL This part describes the Smart-MC0101 communication protocol with LoRaWAN network. In fields consisting of several bytes, the little-endian byte order is used SMART-MC0101 TRANSMITS THE FOLLOWING TYPES OF PACKETS 1. Packet with current readings, sent regularly, and every time alarm event occurs on... - Page 24 Smart-MC0101 / User Manual 3. Settings packet – transmitting on LoRaWAN port 3 when settings request command received, or device connected to the network Size in bytes Field description Data type 1 byte Packet type, this packet == 0 uint8...
-
Page 25: Smart-Mc0101 Receives The Following Types Of Packets
Smart-MC0101 / User Manual SMART-MC0101 RECEIVES THE FOLLOWING TYPES OF PACKETS 1. Real-time clock adjustment – sent by application on LoRaWAN port 4 Size in bytes Field description Data type 1 byte Packet type, this packet = 255 uint8 8 bytes... - Page 26 Smart-MC0101 / User Manual Table of ID of Smart-MC0101 parameters and these possible values ID of Description Data Possible values parameter length Confirmed uplinks 1 byte 1 – confirmed 2 – unconfirmed Communication period 1 byte 1 – 1 hour 2 –...
-
Page 27: Storage And Transportation Requirements
Smart-MC0101 / User Manual 6 STORAGE AND TRANSPORTATION REQUIREMENTS The Smart-MC0101 sensor shall be stored in the original packaging in heated room at temperatures +5°С to +40°С and relative humidity less than 85%. The sensor shall be transported in covered freight compartments of all types at any distance at temperatures -40°C to +85°C. -
Page 28: Content Of The Package
Smart-MC0101 / User Manual 7 CONTENT OF THE PACKAGE The sensor is delivered complete with: Door and window sensor Vega Smart-MC0101 – 1 pc. CR123A battery – 1 pc. Factory certificate – 1 pc. Revision № 04 - 06 July 2020... -
Page 29: Warranty
Smart-MC0101 / User Manual 8 WARRANTY The warranty period for the device is 5 years from the date of sale. The manufacturer is obligated to provide repair services or replace the failed device during the entire warranty period. The consumer undertakes to comply with the terms and conditions of transportation, storage and operation specified in this user manual. - Page 30 Smart-MC0101 / User Manual vega-absolute.ru User Manual © Vega-Absolute OOO 2017-2020 Revision № 04 - 06 July 2020...