ViewSonic DLP PROJECTOR PJD7400W User Manual page 46

• The source list varies according to the connectors available on the projector.
• When you use the projector control panel or remote control to change the OSD menu
settings, it may take a while for the web browser to synchronize these changes with the
projector.
3. The tools page allows you to manage the projector, configure the LAN control
settings and secure access of remote network operation on this projector.
i. This section is only used with the Crestron Control System. Please
contact Creston or refer to its user manual for setup information.
ii. You can name the projector, keep track of its location and the person in
charge of it.
iii. You can adjust the LAN Control Settings.
iv. Once set, access to the remote network operation on this projector has
been password-protected.
v. Once set, access to the tools page has been password-protected.
• To prevent errors, only input the English alphabet and digits on the tools page.
• After making the adjustments, press the Send button and the data will be saved for the
projector.
vi. Press Exit to go back to the remote network operation page.
Please pay attention to the limitation of input length (including space and other punctuation
keys) in the list blow:
Category Item
Crestron Control
Projector
i ii
iii
vi
Input Length
IP Address
IP ID
Port
Projector Name
Location
Assigned To
41
iv
v
Maximum Number of
Characters
15
2
5
10
9
9