Connection - ViewSonic DLP PROJECTOR PJD7400W User Manual

Connection

When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
• In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page
• The connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
• For detailed connection methods, see pages 17-19.
Monitor
(VGA)
or
1
1. VGA cable
2. VGA to DVI-A cable
3. USB cable
4. Component Video to VGA (D-Sub)
adapter cable
5. S-Video cable
6). They are commercially available from electronics stores.
Notebook or
desktop computer
(DVI)
3 1 8
2
TYPE B
LAN USB
15
A/V device
4 8 5 6 7
COMPUTER IN1
RS 232 MONITOR OUT
COMPUTER IN2
6. Video cable
7. Audio L/R cable
8. Audio cable
9. Microphone 3.5 mini jack cable
Microphone
Speakers
8 9
S-VIDEO AUDIO IN2 (R)
AUDIO
IN1
AUDIO
OUT
MIC
VIDEO AUDIO IN2 (L)