Advertisement
Quick Links
PD101G Series
Gigabit Unmanaged POE
Splitters
User manual
Shenzhen 3onedata Technology Co.,Ltd
Tel:+86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【
】
Introduction
PD101G Series are Cost-efficient single-port IEEE 802.3af/at
compliant PoE splitter, High-reliability performanc,Work with
IEEE 802.3af/at compliant PoE switch or PSE Injector,Can get
separated data and power output from standard PoE cable and
supply data and power separately for devices that not support PoE
power.
PD101G Series Provides three different DC output: 5V/9V/12V,
which
enables
it
works
with
different
devices,Improves network flexibility and expansibility by solving
the connection problem between PoE power supply and
PoE-unsupported devices,Can be widely used in wireless city
projects and Security Surveillance Industry.
【
】
Packing List
Please check the packaging and accessories by your first using.
POE Splitters ×1
DC Power Cord x1
User's Guide ×1
Certificate of quality ⅹ 1
Warranty card ⅹ 1
【
】
Features
Compatible with IEEE802.3at(30W) or IEEE802.3af(15.4W),
can supply power to PDs under the two standards
The " PoE data in" port supports a voltage range of 36-57V,
can auto-response to the power supply from PSE power
module
Supports 3 different DC output modes: 5V/9V/12V, can easily
get devices that not support PoE power connected with PoE
network devices
Comes with 4 different types of DC plugs, can easily handle
with different connections
Supports Circuit Isolation Protection, provides good
protection for the PDs
【
】
Panel Layout
Front panel
Back panel
kinds
of
end
1. Ethernet Data port
2. Power Indicator
3. DC power input socket
4.POE port
【
】
Dimension
【
Power Input
PD101G Series
DC
power adapter specification is internal size 2.1mm, external
size 5.5mm.
】
provide
DC power input, voltage input is,
Advertisement
Related Manuals for 3onedata PD101G Series
Summary of Contents for 3onedata PD101G Series
- Page 1 IEEE 802.3af/at compliant PoE switch or PSE Injector,Can get separated data and power output from standard PoE cable and Back panel supply data and power separately for devices that not support PoE power. PD101G Series Provides three different DC output: 5V/9V/12V, which enables works with...
- Page 2 LED Indicator space over 10CM around the device. follows: PD101G Series indictor light on the front panel. the function POESplitter Operation Instruction of each LED is described in the table as below. Connect “ Power+Data”port on POE splitter with a...
- Page 3 Operation Temperature: -20~50°C Note：Please choose correct Splitter voltage output state Storage Temperature: -40~70°C according to the voltage requirement of your PDs, or the PDs non-condensing) Operation Humidity:10%～90%( will get damaged. The default voltage output is 5V. non-condensing) Storage Humidity:5%～90%( Mechanical Properties: 【Specification】...