Advertisement
5.1. Start the Windows application that you want to receive the data (e.g.,
Excel, Notepad, etc.). Make sure a document or spreadsheet is open.
5.2. Press the Champ CF/SD Barcode trigger button and scan the code.
For example, try this barcode:
When data is read, a beep should sound, and the imager should turn off.
If the CF/SD Barcode Card fails to read data within a few seconds, the
imager will turn off, and you must try again.
After a successful scan, data should appear in your document. For
example, after you scan the code above into a Pocket Excel spreadsheet,
data should appear in the first cell
6. Exit Champ Barcode Keyboard Emulator
Open"
" it list on bottom of your PDAs .
Click " Exit " to close Champ Barcode Keyboard Emulator program.
7. It needs to run the Champ Barcode Keyboard Emulator program again after the
Pocket PC is powered off.
2
K:\Products\Packing\BC\BC-PL788-CF,SD\ChampBarcodeScannerQuickStartGuide.doc
Advertisement
