Personal Computer - ViewSonic VS13231-1M User Manual

Getting Started

Personal Computer

Use the LED TV as the monitor of your computer.
The picture below shows the connection for PC. The LED TV can also be connected to PC
with DVI or HDMI output.
• Connect the VGA Signal In jack to the PC using a 15-pin cable.
• Connect the VGA Audio In jack to the PC using an audio cable.
• If the PC is connected to the TV and no signal has been input from PC for more than 5
seconds, the TV will enter standby mode automatically.
PC Timing Reference Chart
Standard Resolution
DOS 720 x 400 @ 70Hz
VESA 640 x 480 @ 60Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 75Hz
VESA 1360 x 768 @60Hz
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Connect to an HDMI
compatible PC with
the HDMI cable
Audio cable
VGA 15 Pin cable
Compatibility Table
Composite SVHS
No No
No No
No No
No No
No No
No No
No No
No No
No No
19
Rear of TV
YPbPr RGB HDMI
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
No Yes Yes
VT1900LED