Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1253
GETAC UX10 TABLET CRADLE
This instruction sheet is for the Getac UX10 TABLET cradle only. For instructions on
features, set-up, and operation of the computer, please refer to the manual provided by
Getac with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with each
individual product.
This instruction sheet is for the following products:
Item No. 7160-1252-00 No RF (External Power Supply sold separately)
Item No. 7160-1252-03 Tri RF (External Power Supply sold separately)
Getac recommends using the following Power Adapters to power the docking station. They
can be ordered from Gamber-Johnson seperately.
17057 - Auto
(12-32 Vdc input)
16079 - Isolated (12-32 Vdc input)
16078 - Isolated (20-60 Vdc input)
16513 - Isolated (72-110 Vdc input)
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. A
Printing Spec: PS-001
Form
INST-964
1/3
Advertisement
Related Manuals for Gamber Johnson 7160-1253
Summary of Contents for Gamber Johnson 7160-1253
- Page 1 INSTALLATION INSTRUCTIONS Product Revision Form 7160-1253 INST-964 Rev. A GETAC UX10 TABLET CRADLE Printing Spec: PS-001 This instruction sheet is for the Getac UX10 TABLET cradle only. For instructions on features, set-up, and operation of the computer, please refer to the manual provided by Getac with the computer.
- Page 2 FEATURE IDENTIFICATION Slam Latch Release Button Barrel Key Lock Upper Walls Provides docking guidance and connector protection, prevents mis-docking Lower Walls Guide Pins External Antenna - Tri RF (2) USB 2.0 (Optional) Docking Connector (Fast Charging) 1500 mA External Antenna - SMA (WiFi, GPS, CELL) (Optional) Part#/Serial# Label...
- Page 3 DOCKING AND UNDOCKING THE TABLET OPERATION - DOCKING 1. Insert the front of the tablet into the front guide pines of the dock. The walls on the dock will Push Down guide the tablet into place. 2. Rotate the back of the tablet and push down, overcoming the resistance until an audible click is heard.