ELCOM EK-3000 Manual

Important
• Install the keyboard in a place where it will not be exposed to direct sunlight, unusual
temperature changes (under 0 °C and above 50 °C) or high humidity. Installation in such
places could result in damage to the cabinet and electrical components as well.
• After transporting the unit form a cold environment to a warm one and vice versa, do not
switch on the keyboard for 20 minutes.
• An individual having wet hands should not operate the keyboard. Water could seep into
the interior of keyboard and cause component failure.
• Clean the keyboard with dry, soft cloth. Never use such cleaning agents like petrol or
solvents. Using such chemicals can result in discoloration or deterioration of cabinet.
• Avoid spiling any liquids on the keyboard as they may damage its functionality.
• If the keyboard malfunctions, contact your authorized dealer for service. Do not try to
repair the keyboard yourself. Do not open the keyboard!
• If the keyboard is used in ways other than those described in these instructions, the
dealer cannot be responsible for resulting damages.
• The symbol on the product or on its packaging indicates thatthis product shall not be
treated as household waste. Instead it shall be handed over to the applicable take-
-back scheme for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the enviroment and human health.
EK-3000
Programmable keyboard
EK-3000