Ⅷ. Care And Maintenance - RTS SPEED3X RS User Manual

Table of Contents

Advertisement

The wheelchair attachment is a sophisticated victory. Like any motorized wheelchair attachment, it requires maintenance checks. You
can check it yourself, but others require assistance from the dealer of the wheelchair attachment. Preventive maintenance is very
important. If you follow the maintenance checks in this section as scheduled, you can help ensure that your wheelchair attachment gives
you years of trouble-free operation. If you have any doubt as to your wheelchair attachment's care or operation, contact the dealer.
WARNING! Your wheelchair attachment like most electrical equipment is susceptible to damage from the elements.
Avoid damp areas of any kind. Water can cause electrical components to corrode and the chair's frame to rust.
SHOULD YOUR WHEELCHAIR ATTACHMENT COME IN CONTACT WITH WATER?
1.
Dry your wheelchair attachment as thoroughly as possible with a towel.
2.
Allow your wheelchair attachment to sit in a warm, dry place for 24 hours to allow unseen water to evaporate.
3.
If any inconsistencies are found, take your wheelchair attachment to your authorized Provider.
GENERAL GUIDELINES
Avoid knocking or bumping the controller.
Avoid prolonged exposure of your wheelchair attachment to extreme conditions, such as heat, cold, or moisture.
Keep the motor clean.
Check all connectors to ensure that they are all tight and secured properly.
NOTE: Please deal with the former battery as the local way of dealing with the castoff.
CORRECTIVE MAINTENANCE
If the battery condition meter does not light up when you turn on the power.
Check the battery base connections. Make sure they are tight.
OTHER CORRELATION COMPLEXION
1、Temperature
Some of the parts of your wheelchair attachment are easy to extreme changes in temperature. Always keep your wheelchair attachment
between the temperatures of 7 degree to 25°C.
In extremely cold temperature the batteries may freeze. The specific temperature at which they freeze depends on a number of
factors, such as battery charge, usage, and composition of the batteries.
The high temperature may cause your wheelchair attachment to operate at a reduced speed. This reduce speed is a safety feature
built into the controller that helps prevent damage to the motor and other electrical components.
2、Storage
Your wheelchair attachment should be stored in a dry place, free from temperature extremes. When storing, disconnect batteries from
the power.
3、When to see your authorized Provider for service.
The following symptoms could indicate a serious problem with your wheelchair wheelchair attachment . If necessary, contact your
authorized Provider. When calling, have the model
number, serial number, nature of the problem, and
the error code if available.
WARNING! Do not use a rubber or vinyl conditioner on the wheelchair attachment, or tire tread. They will become
dangerously slippery and result in personal injury and/or damage to your wheelchair attachment.
Page 16
Ⅷ. CARE AND MAINTENANCE
◆ Motor noise
◆ Frayed harnesses
◆ cracked or broken connections
◆ uneven wear on any of the tires
◆ pulling to one side
◆ bent or broken wheel assemblies.
◆ Jerky motion
◆ powers up, but does not move

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents