Ⅶ. Basic Troubleshooting - RTS SPEED3X RS User Manual

Any electromechanical device requires occasional troubleshooting. However, most problems that arise can usually be solved with a bit
of thought and common sense. Many of these problems occur because the batteries are not fully charged or because the batteries are
worn down and can no longer hold a charge.
WHAT IF ALL OF MY WHEELCHAIR ATTACHMENT SYSTEMS APPEAR TO BE
"DEAD."
1. Ensure that the batteries are fully charged.
2. Make certain that battery are firmly connected.
3. Make sure that the front-to-rear harness is firmly connected.
4. Remove and reinsert the key.
WHAT IF THE MAIN CIRCUIT BREAKER REPEATEDLY TRIPS?

Charge the wheelchair attachment's batteries more frequently.

If the problem continues, have both of your wheelchair attachment's batteries load tested by your authorized Provider.
WHAT IF THE BATTERY CONDITION METER DIPS WAY DOWN AND THE MOTOR
SURGES OR HESITATES WHEN I PRESS THE THROTTLE CONTROL LEVER?

Fully charge your wheelchair attachment's batteries.

Have your authorized Provider load test each battery.
If you experience any problems with your wheelchair attachment that you are not able to handle, immediately contact your authorized
Provider for information, maintenance, and service.
Page 15
Ⅶ. BASIC TROUBLESHOOTING