Table of Contents
Advertisement
Getting Started
Attaching the mount
ViewSonic
1.
Place the frame on a flat surface with its back facing you.
2.
Place the mount carefully in the slot on the back of the frame.
3.
Turn the mount counter-clockwise by 45°until it locks. It will now be possible to
set the device in the landscape orientation.
4.
Turn the mount counter-clockwise by 90° until it locks. It will now be possible to
set the device in the portrait orientation
5.
After the mount has been attached, you can adjust the height of the mount by
pushing the mount gradually to the required alignment.
4
VFD725w-50P/VFM735w-51P
Advertisement
Table of Contents
