STAR INDUSTRIES 1150C Operator's Manual

4101 Garland Drive, Fort Worth, TX 76117
Forklift
Spreader Bar
Operator's Manual
for Model 1150C
Before Use, READ AND UNDERSTAND THE
COMPLETE OPERATOR'S MANUAL.
If you need clarification or any additional information call
your Star dealer or call Star Industries @ 1-800-541-1797
during normal business hours.
Installation, Use & Safety Precautions
The model 1150C Extendable Spreader Bar is
designed for use with a rough terrain forklift of
adequate capacity to safely handle the load. The
Spreader Bar extends from 8 feet to 10 feet to 12
feet and comes equipped with fork pockets that
will accept up to 7" wide X 3" thick forks. Be aware
that the information contained in this manual is
intended as a guide and does not replace the need
for the user to know, understand, and observe all
applicable company, local, state, and federal safety
codes and or requirements. The model 1150C
meets/exceeds the requirements of ASME B30.20-
2006 and is classified as Category A and Service
Class 0 as defined in ASME BTH-1-2005.
DANGER - DO NOT USE WITHOUT INSTALLING
RETAINING PINS behind the heel of each fork and
securing with hair pins or cotter pins
Safety chain(s) must also be used. Wrap chain
around a strong part of the fork carriage and secure
with locking grab hook.
Phone 817.485.6073 Fax 817.428.6008
www.starindustries.com
RATED LOAD CAPACITY
Empty Weight - 545 lbs.
Center Hook used alone 6,000 lbs.
At 8 feet wide 8,000 lbs.
Extended to 10 feet wide 6,400 lbs.
Extended to 12 feet wide 5,000 lbs.