Page 2
1. Function Thank you for choosing this camera. Please carefully read the manual before using, and keep it at a safe place for future reference. The compilation of the manual refers to the latest information. The manual quotes captured screen displays and graphics, with the aim to introduce the digital camera through detailed and direct methods.
Page 3
Camera Maintenance Keep it in a dry and dark place for keeping idle; Use proper protective cover to avoid lens and display scratched; Keep the camera into a protection case to avoid scratches on the lens and screen; In case of cleaning the surface of camera lens, first blow the dust off the surface, use a cloth or paper available to optical equipment to wipe the lens gently.
Page 5
5.Removing the battery from the camera. Start to use 1. Charge the built-in lithium battery The camera is equipped with built-in 3.7V lithium battery. Please ensure power available for the camera and timely charge it in case of low battery. Connect the camera to computer for charging under shutdown status.
Page 6
3. Startup and shutdown 3.1 Startup: press the POWER key for 3 second, the camera will show startup screen and enters into POWER ON state; 3.2 Shutdown: press the POWER key for 3 second when the camera is under idle mode to shut down;...
Page 8
to enter preview. Press mode key to enter playback mode to browse photo/video, play the video recorded by this camera. Play movie: press the shutter key to start/pause play video, press the Up/Down key to restart quickly/ fast forward playback, press the power key to stop play video. 8.Menu setting mode 8.1 menu display Press mode key until enter in options display.
Page 9
System menu mode: 8.3 setting data and time Press mode key to open the menu, press mode key again until arrive to the grain icon and press shutter to enter. Press up/down key to select “date and time” and then press shutter to enter.
Page 10
Once you will get all pictures, import them in your video editor software as “frame sequence”. Depending of the software that you will use, you should import the pictures in a special way; please, check your software’s manual to know how to do it. Maybe yo u’ll have to rename the photo files to allow your software identify them correctly.
Page 11
Note: during file downloading, it is prohibited to disconnect USB connection, and plugging out the memory card when USB connected is also prohibited to avoid loss of data. 10.2 in U-disk mode (MSDC mode), press the shutter key to switch to web cam mode (PCCAM) the LCD will display: PCCAM.
Page 12
4. Click the icon in the App list of the smartphone or tablet to open it. Now you can preview the image sent by the DV on the phone or tablet and start some operating. The operation interface on terminal is shown in above-right position figure. This app shows in the main display 3 options: video, photo and movement.
11.3. IOS APP 1. Install “ XDV” APP ( provided by dealer or via internet) on iOS phone or tablet. When installation completes, the LCD will display icon 2.Enable Wi-Fi on iOS phone or table and search for wireless AP signal “4K camera”, then connect it to DV, until the system displays “Connected successfully”.
Need help?
Do you have a question about the ACE800 and is the answer not in the manual?
Questions and answers