GE AS0CD09 Owner's Manual & Installation Instructions page 18

Installation instructions.
Indoor unit installation.
F
Hook the indoor unit onto the upper
portion of the installation plate. (Engage
the two hooks of the rear top of the indoor
unit with the upper edge of the installation
plate.) Ensure that the hooks are properly
seated on the installation plate by moving it
left and right.
Press the lower left and right sides of the unit against
the installation plate until the hooks engage with their
slots (clicking sound).
Connecting the pipings to the indoor unit.
G
1 Align the center of the pipings and
sufficiently tighten the flare nut by hand.
2 Tighten the flare nut with a wrench.
Indoor unit tubing
18
CAUTION: Be careful to arrange the pipings, drain hose
and cables as shown on page 17 by connecting them to the
indoor unit.
Connecting
cable
Drain hose
Piping
Flare nut
Wrap the insulation material around the
H
connecting portion.
Isulation material
Plastic bands
Wrap insulation material around the connecting portion.