Hitachi 32HDL52A Service Manual page 13

Menu Function
Video
Picture Mode
Video
Brightness
Tint
Color
Detail
Backlight
Color
Temperature
ADC
ADC Off - R
ADC Off - G
ADC Off - B
ADC Gain - R
ADC Gain - G
ADC Gain - B
TCD3
TCD3 Con.
TCD3 Bri.
TCD3 Hue
TCD3 Sat.
TCD3 Sat.
YC Delay
Peaking Range
Peaking Gain
Peaking Enable
OSD menu video mode default setting
Display Contrast adjustment ( Back- end )
Display Brightness adjustment ( Back- end )
Display Hue adjustment ( Back- end )
Display Saturation adjustment ( Back- end )
Display Sharpness adjustment ( Back- end )
LCD backlight control ( Back- end )
Color temperature default setting ( High or Low )
ADC input signal offset adjustment ( R/Pr ) , For D2 ~ D4 and PC only
ADC input signal offset adjustment ( G/Y ) , For D2 ~ D4 and PC only
ADC input signal offset adjustment ( B/Pb) , For D2 ~ D4 and PC only
ADC input signal gain adjustment ( R/Pr ) , For D2~ D4 and PC only
ADC input signal gain adjustment ( G/Y ) , For D2 ~ D4 and PC only
ADC input signal gain adjustment ( B/Pb) , For D2 ~ D4 and PC only
Video decoder contrast adjustment ( Front- end )
Video decoder brightness adjustment ( Front- end )
Video decoder Hue adjustment ( Front- end )
Video decoder Cr Saturation adjustment ( Front- end )
Video decoder Cb Saturation adjustment ( Front- end )
Video decoder YC delay adjustment ( Front- end )
Video decoder sharpness peaking range ( Front- end )
Ypeak = Y + YH * (peak_gain/peak_range) where Y is the luma and YH
Video decoder sharpness peaking gain ( Front- end )
Video decoder sharpness peaking function enable ( Front- end )
Description
is the high frequency luma only
13