Table of Contents
Advertisement
Making and Receiving Calls
This chapter describes how to make and receive calls, how to make international and emer-
gency calls, how to show or hide your phone number when calling (CLI – Calling Line Identifi-
cation) and how to handle two calls simultaneously.
Making a Call
1. Enter the area code and phone number.
The phone number is shown in the display. If
the number is longer than 10 digits, the begin-
ning of the number will be shown as an arrow
(see Figure 10).
Figure 10. Number with more than 10 digits.
To erase a digit, press
. To erase the en-
CLR
tire phone number, press and hold down
for a couple of seconds.
2. Press
to make the call. The display shows
YES
Calling, followed by Connecting and the
phone icon is lit.
If the number is busy, you will hear a busy
tone and the display shows Busy.
6
Holding the Phone
Put the earpiece to your ear for optimum speech
and reception quality (see Figure 11).
Figure 11. Holding your phone.
CLR
Ending a Call
Press
to end the call.
NO
Making an
International Call
1. Press and hold the zero key until the interna-
tional + prefix is displayed.
2. Enter the country code, area code (without
any leading zero) and the phone number.
3. Press
to make the call.
YES
Making an
Emergency Call
Enter
(The international emergency num-
112
ber) and press
YES.
The display shows Emergency.
The
emergency number can be used in any
112
country with or without a SIM Card, provided a
GSM network is within range.
Retry Function
If the call connection fails, the display shows
Retry? Press
to redial the number, other-
YES
wise
.
NO
Receiving a Call
When you receive a call, the phone rings and
the indicator light on the top of the phone blinks
green rapidly. The display shows Answer?
EN/LZT 126 1344 R1A
Advertisement
Table of Contents
