Advertisement
AVMW
AVMA
48" CAT5e
Figure 5
7.
Place AVMW box into electrical box.
8.
Use four #6-32 x 1/2" Phillips flathead screws to secure
AVMW to electrical box.
9.
Use Decora plate and four #6-32 x 1/4" flathead screws to
secure AVMW input box to the wall. (See Figure 6)
Figure 6
6
AVMW
AVMW
Wireless Microphone (AVxHM)
All CoPilot microphone devices use a battery charger with 6V
wall power supply included. The power supply is UL/Energy
Star rated and plugs into a standard 120VAC outlet.
All microphone devices have a fast charging time; 50%
recharge in 30 minutes, 100% FULL recharge in 90 minutes.
During charging front LED will begin as bright green and when
fully charged will dim. This is normal. The units will operated for
5-6 hours of continuous talk time when fully charged.
Charging Stand Assembly
1.
Insert the metal holder into the base allowing the
microphone to be placed into the holder and supported
vertically in the base. (See Figure 7)
2.
Plug charging cable into wall and charging base. (See
Figure 7)
3.
Insert microphone into metal holder on base until
microphone is fully charged (LED light = green). (See Figure
7)
NOTE:
The 6V wall charger power supply terminates to the
USB mini jack on the base. When fully charged in 90
minutes, the microphone will operate for 6-8 hours of
continuous talk time.
NOTE:
Charging stand has LED charging status colors of:
•
Blue = ON
•
Red = Charging
•
Green = Fully Charged
wireless microphone
charging cable
metal holder
2
charging stand
Figure 7
Installation Instructions
3
1
Advertisement
