NIXON Mini Blaster User Manual page 6

Multi pair it
Hold both track skip buttons on both
speakers to engage + 3 SEC
Press and hold both track skip buttons at the same time on 2 Mini Blasters for 3
seconds then release to enter into Multi-Pairing mode.
This will activate a sound prompt explaining that 2 devices are entering into
Multi Pair Mode.
After 5 seconds a sound prompt will notify you that 2 Mini Blasters are Multi Paired.
Press and hold the Multi Button for 2 seconds then release to enter Bluetooth
Mode. The speaker will sound a tone and the Bluetooth
Now locate the Bluetooth® settings on your music device, enable Bluetooth®, and
then select "NIXON MINI BLASTER" from the list of local Bluetooth
It is important to note that your Bluetooth
device is connected to 1 Mini Blaster at a time and
the second Mini Blaster is connected by a signal sent
out by the main Mini Blaster. You will need repeat
these instructions to connect to authentic Mini Blaster
through "multi – pairing" mode.
When Bluetooth
LED will stop flashing and illuminate solid.
NOTE: If your music device supports automatic
Bluetooth ® connection requests, The Mini Blaster may ask your music device to
connect. Simply confirm by selecting "OK" on your music device.
If your music device does not support Bluetooth
Audio Cable to play music directly to The Mini Blaster.
NOTE: When using the AUX input of The Mini Blaster, the Bluetooth
is disconnected, and the remote control buttons and internal microphone will not
function.
+
®
® LED will flash repeatedly.
® devices.
® enabled
® pairing is successful, the Bluetooth
® connections, use the included AUX
® audio signal
Crank it up
Volume Volume
Down
Use the Volume Up and Volume Down buttons to set the playback level of The Mini
Blaster.
If the sound is distorted, decrease the volume setting on your music device first, then
set the volume level of The Mini Blaster. A low battery can also cause the sound to
become distorted, so it is important to keep a healthy charge.
NOTE: Because the volume control buttons of The Mini Blaster do not control the
volume output of your music device, you must properly adjust the volume settings of
each device independently.
Switch it up
Pairing
®
PREVIOUS TRACK
You can control many functions of your music device directly from The Mini Blaster
when connected via Bluetooth
NOTE: When you first power ON The Mini Blaster and reconnect to your music
device, simply pressing the Multi Button will begin music playback from where you
last stopped.
Up
PLAY/PAUSE
NEXT TRACK
FAST-FORWARD HOLD
REWIND HOLD
®
.