Setup - SteelSeries Nimbus+ Product Information Manual

SETUP

INITIALIZATION
1 Turn on your Nimbus+ by pressing and holding
the Home Button
2 All four LEDs
3
indicate your Nimbus+ is in pairing mode. If
not, hold the Wireless Pairing Button
seconds.
3 To pair your Nimbus+ to your iOS device, go
to Settings → Bluetooth. "Nimbus+" will be
displayed on the screen. Tap to Connect.
5
More detailed product information at
6 .
will fade on and off slowly to
for 3
9
steelseries.com/nimbus-plus
PAIRING TO A NEW DEVICE
1 Press the Wireless Pairing Button
seconds.
2 All four LEDs will fade on and off slowly to
3
indicate that your Nimbus+ is in pairing mode.
RECONNECTING TO
AN EXISTING DEVICE
1 Turn on your Nimbus+ by pressing and holding
the Home Button
6 .
2 During the connecting sequence, the LEDs
will fade on and off, cycling from 1 to 4. The
Nimbus+ will automatically reconnect to the
most recent device when powered on.
If you want to connect to a previously paired
device, simply select the Nimbus+ from the
Bluetooth menu on the Apple device.
for 3
9
3