Advertisement
Quick Links
** SEE OUR WEBSITE FOR STEP BY STEP ASSEMBLY VIDEOS **
https://vegepod.com.au/pages/assembly-videos
Stand/Trolley Assembly Instructions
Small 1m x 0.5m
Component Checklist
Legs
Angle cross braces(long)
Angle cross braces(short)
Cross brace tube
Corner brace
Long Bolts
M6*55
Medium Bolts
M6*45
Short Bolts
M6*16
Nuts
Large Bolts
Angle trolley support
Tube for Trolley base
Castor wheels
+ rubber caps
Allen keys
4
2
2
2
4
8
4
16
28
4
2
2
4
2
Advertisement
Related Manuals for Vegepod Small Trolley Stand
Summary of Contents for Vegepod Small Trolley Stand
- Page 1 ** SEE OUR WEBSITE FOR STEP BY STEP ASSEMBLY VIDEOS ** https://vegepod.com.au/pages/assembly-videos Stand/Trolley Assembly Instructions Small 1m x 0.5m Component Checklist Legs Angle cross braces(long) Angle cross braces(short) Cross brace tube Corner brace Long Bolts M6*55 Medium Bolts M6*45 Short Bolts...
- Page 2 Assembly IMPORTANT ***** Trolleys should only be used against a structure. If exposed the trolley is susceptible to tipping in high wind ENSURE STAND TROLLEYS ARE ONLY USED ON FLAT, HARD LEVEL GROUND The wheels will not work on soft areas. Once filled with soil the Vegepods are very heavy.
- Page 3 5. Then place legs into corner braces so holes line up. (*important – also ensure the holes at the bottom of the legs are aligned lengthways. The tube for Trolley base will be positioned between these holes.) Using the long bolts, push them through the holes, then add nut and do up finger tight.