Page 1
** SEE OUR WEBSITE FOR STEP BY STEP ASSEMBLY VIDEOS ** https://vegepod.com.au/pages/assembly-videos Stand Assembly Instructions Small 1m x 0.5m Component Checklist Legs + plastic end caps Angle cross braces(long) Angle cross braces(short) Cross brace tube Corner brace Long Bolts M6*55...
Page 2
Assembly IMPORTANT ***** ENSURE STANDS ARE ON FLAT LEVEL GROUND If placing the stands on lawn or soft surfaces - Ensure the legs are placed on footings made from pavers or bricks that are level to prevent the legs sinking into the earth.
Page 3
5. Then place legs into corner braces so holes line up. Using the long bolts, push them through the holes, then add nut and do up finger tight. 6. Push in plastic feet and tighten all bolts...