Phonak Roger Touchscreen How To Connect page 2

Connecting to Computers/Tablets
1.
Plug one end of supplied 3.5 mm/ 1/8 " cable into the
multimedia device's audio out (i.e. headphone jack).
2.
Plug the other end into the Roger Touchscreen
Mic's 3.5 mm/ 1/8 " audio jack.
3.
Select "input" from the pop up menu on the Touchscreen
4.
Select "Headphones" from the pop up
menu on your computer. Figure 1
5.
Control volume by clicking on the speaker icon on the
bottom right corner of your computer screen. Figure 2
Figure 1
Figure 2