Page 1
To switch on, press the On/Off button on the side of the • Roger Touchscreen for 3 seconds. The green indicator lights will flash until fully booted. The power indicator light will continue to fade in and out green during use.
Page 2
Plug one end of supplied 3.5 mm/ 1/8 “ cable into the Figure 1 multimedia device’s audio out (i.e. headphone jack). Plug the other end into the Roger Touchscreen Mic’s 3.5 mm/ 1/8 “ audio jack. Select “input” from the pop up menu on the Touchscreen Select “Headphones”...