Lee Valley Tools PT615 Manual

Giant Weed Torch
(PT615)
The following instructions were provided by the manufacturer.
Please read this manual before operating your weed torch and retain this information
for future reference.
For your safety:
If you smell gas:
1. Shut off gas to the device.
2. Extinguish any open flame.
3. Check the device for leaks using soapy water.
4. Do not attempt to relight the device until leaks are repaired and there is no
gas smell.
Do not use this device in areas where gasoline or other liquids having flammable
vapors are stored or used.
Warning – Do not operate this equipment if:
• You are subject to seizures, loss of consciousness, or fainting.
• You have been drinking alcohol, using illicit drugs, or prescription drugs that
might effect your judgment or balance.
• You have not read or do not understand the operator's manual.
• You are not capable of safely operating this type of equipment.
DO NOT ALLOW CHILDREN TO OPERATE THIS EQUIPMENT.
This device is intended for outdoor use only.
This torch is designed for a vapor-withdrawal LP-gas cylinder.
Assembly Instructions
Note: Unpack and inspect for damage
1. The weed torch is pre-assembled.
2. Take time now to inspect your weed torch.
3. Make sure all parts are in place as shown on the parts list.