Download Print this page

Sealey PH250.V4 Instructions page 3

Power hoist - 250kg / 400kg

Advertisement

6. MaiNteNaNce
6.1.
the hoist should be thoroughly checked over at regular intervals to ensure that it is undamaged and is functioning correctly.
6.2.
isolate from the power supply and inspect the following for any signs of damage, wear or looseness, as appropriate:
a) Lifting cable
b) Electrical cables/connections
c) control switch
rectify any faults that are found, before using the hoist again.
6.3.
Reconnect to power supply and check for correct operation of the control switch and the maximum lift cut-out switch - the hoist should
stop when the counterweight (fig.2.4) lifts the cut-out arm (fig.2.5).
Parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPOrtaNt: no liability is accepted for incorrect use of this product.
warraNty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
d) Mounting brackets/bolts
e) Support structure
sole uK distributor, sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
01284 757500
01284 703534
PH250.V4, PH400.V3 | Issue 2 08/11/16
www.sealey.co.uk
sales@sealey.co.uk

Advertisement

loading

This manual is also suitable for:

Ph400.v3