Subscribe to Our Youtube Channel
Related Manuals for MRC AC-250H
Summary of Contents for MRC AC-250H
- Page 1 INSTRUCTION MANUAL FOR Ultrasonic Cleaner AC-250H PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.VER.01-06.10...
- Page 2 WARNINGS: NEVER TURN ON THE MACHINE WHEN THERE IS NO WATER IN THE TANK. THE TANK SHOULD BE MINIMUM 75% FULL WITH LIQUID TO WITHIN 2CM OF THE TOP. IF NOT THE HEATING ELEMENT WILL BURN. DON'T TURN ON THE MACHINE IF NO WATER OR LESS WATER INSIDE.
- Page 3 ⊿ Please read this instruction manual before using ⊿ Keep this manual for reference ACCESSORISE: 1. one piece main machine 2. one piece soundproof lid . Power supply wire 4. one piece mesh basket (optional) 5. one piece filter mesh ( for outflow function).
- Page 4 properly. (Do not run the cleaner continuously more than one hour at one time) If the heating function needed (if have), please set the temperature ℃ switch to the degree that needed, better to 40-60 . 2. STOP ULTRASONIC PROCESS: 1.
- Page 5 h）Clean the dirt in the tank after using. i）Keep the surface of the machine clean. When the machine is broken or the ultrasonic weakens, it may be caused by...
- Page 6 above reasons, please stop operating the machine and contact maintenance staff. Warning: a ） Don’t plug in the machine with empty tank – be sure to fill in proper amount of liquid before plug-in the machine. Otherwise, the heater could be damaged.
Need help?
Do you have a question about the AC-250H and is the answer not in the manual?
Questions and answers